What should I do if the remote control is unresponsive or not working properly?

The remote control operates using both Infrared (IR) and Bluetooth technologies.

• The IR sensor is located on the back of the projector, so it requires a direct line of sight to function.
• Once the projector is turned on, it should automatically pair via Bluetooth, allowing control from any direction within 15 m, as long as there are no obstacles.

📷  

🔆 LED Indicator Guide

• Red blinking → The remote is sending an IR signal.
• Blue blinking → The remote is sending a Bluetooth signal.

⚙️ Troubleshooting Steps

1. When the projector is off, only IR works.
   → Please aim the remote directly at the back of the projector to turn it on.
2. When the projector is on, it should switch to Bluetooth mode.
   → If it doesn’t, try to re-pair the remote:
   Hold the “Back” + “Home” buttons simultaneously until the LED flashes blue — this means pairing is in progress.

📷